The pneumatic actuator butterfly valve with sensor was on production line …
Pneumatic Diaphragm Valve with stainless actuator
diaphragm valve, specially designed for using on food, beverage, dairy, brewing, pharmaceutical industries, etc. It is excellent for flow control as well as for open/close duties.
- Body: AISI-316L
- Membrane: EPDM+PTFE
The seal materials comply with FDA177.2600 standard. Using proprietary technology, the diaphragm uses a combination of EPDM and PTFE, which is secured using SS bolts. The sealing part where contact with the medium is of PTFE material, it has good cold resistance -13℉(-25℃), excellent heat-resistance 482℉(+250℃), tolerance to most chemicals, and excellent abrasion resistance to medium flow.
- Standards: DIN, SMS, ISO / IDF, BS / RJT, ASME / BPE.
- End connections: butt-welded, sanitary clamp, or others upon request
- Body type: T-type tee, U type tee, Mini type, tank bottom type, etc.
- Max. working pressure: 147psi (10bar)
- Temperature range: 14 ~ 248℉ (-10 ~ 120℃), EPDM
- Inside polishing: Ra 16-32& micro;in (0.4 ~ 0.8µm)
- Available for CIP/SIP.
PFA or Perfluoroalkoxy alkane are fluoropolymers. PFA, FEP, PTFE, the chemical properties are similar, but FEP can only be used below 200℃, and the big difference of PTFE is that the PFA allow the polymer to be melt-processed. This kind of resin can be directly processed into products by ordinary thermoplastic forming method. Suitable for making corrosion-resistant products, antifriction wear parts, seals, insulation and medical equipment parts, high-temperature wire, cable insulation, corrosion protection equipment, sealing materials, valve bushing, and chemical containers.
Performance of PEA lined fittings:
- A copolymer of polytetrafluoroethylene and polytetrafluoroethylene. The melt adhesion increases and the viscosity of the solution decrease, while the performance does not change compared with that of PTFE. This kind of resin can be directly processed into products by ordinary thermoplastic forming method.
- long-term use temperature -80–260 degrees, have excellent resistance to chemical corrosion, to all chemicals are corrosive, the lowest friction coefficient in the plastic, and good electrical properties, the electrical insulation is not affected by temperature, with “the king of plastic”.
- Its chemical resistance is similar to that of polytetrafluoroethylene, better than that of vinylidene fluoride.
- Its creep resistance and compressive strength are better than PTFE, tensile strength high, elongation of up to 100-300%. Good dielectric property and excellent radiation resistance. Flame retardant up to V0 grade
- Suitable for making corrosion-resistant parts, wear and tear resistant parts, seals, insulation and medical equipment parts.
- High-temperature wires, cables, insulation, corrosion protection equipment, sealing materials, valve bushes, and chemical containers.
CJan- Teflon hose fittings manufacturer, we insist on technical development, continuous product innovation to make our products to meet various industry’s international standard.
PFA lining has the following characteristics:
Teflon fittings using food grade PFA particles by high temperature melting and stainless steel products as a whole, the surface is smooth, with sanitary structure, resistant to full vacuum, the temperature range of -60℃ to +230℃.
Mainly used for conveying strong corrosive chemicals, hot air, hot oil, steam and so on.
The use of Teflon hose fittings matching with Teflon hose is widely used in pharmaceutical, cosmetic, chemical, acid and alkali corrosion etc.
Sanitary Food Grade Jacketed 90 Degree Clamped Elbow with Heat Preservation /Sanitary Food Grade Jacketed Clamped tee for chocolate is ready for our customer,
Sanitary Food Grade heating jacketed 90 Degree Clamped Elbow / Sanitary Food Grade heating jacketed Clamped Tee.
The Sanitary Food Grade Jacketed 90 Degree Clamped Elbow with Heat Preservation /Sanitary Food Grade Jacketed Clamped tee with Heat Preservation is specially developed to maintain a temperature in the pipe line.
Sanitary Food Grade Jacketed 90 Degree Clamped Elbow with Heat Preservation / Sanitary Food Grade Jacketed Clamped tee with Heat Preservation is largely use to sustain process media temperature during process to keep fluids at a lower viscosity to operate valve smoothly.
Sanitary Hygienic 3 way Jacketed ball valve with Heat Preservation is widely used in Food Process, like chocolate , and other anti-crystallization and heating insulation industry system.
The Sanitary Food Grade Jacketed ball valve with Heat Preservation is specially developed to maintain a temperature in the valve. The volume of steam or hot water in the jacket depends on the size of the ball valve.
For more detailed information, please visit our website http://www.sansunstainless.com
or contact us at email@example.com.
Mini ball valve / stainless steel Mini ball valve / 304 stainless steel Mini ball valve / 316 stainless steel Mini ball valve.
Mini ball valve is suitable for PN 1.0~4.0MPa， working temperature is-29℃ to 180℃(These sealing ring is reinforced polytetraiuoroethylene) or-29~300℃
(the sealing ring is Para-polyphenylene) is used to cut of for connect the medium in the pipeline.Different materials are selected， which can be respectively applied to water， steam， oil， acetic acid and other media.
Powder butterfly valve is mainly designed for powder, granule, capsule and other container equipment systems. The butterfly valve has the characteristics that standard butterfly valve does not have, such as ultra-small torque, seal open/close does not produce excessive friction, long life, No seal powder shedding, ultra-short valve body and adjustable pressure. The valve does not require professional tools to be disassembled, maintained, cleaned, safe, reliable, low cost, simple to operate and can be interchanged manually, pneumatically or electrically.
For more information, please visit our website www.sansunstainless.com or contact us at firstname.lastname@example.org.
Mixproof butterfly valve is ready for our clients.
The mixproof butterfly valve as a process element for the separation of media, is suitable for a variety of applications:
●In CIP systems, for separating CIP cleaning fluid
●In flush-out processes
●In water management
●Part of pipeline separates material
●In CIP/gas management (breweries)
●Storage tanks for separating product/CIP
● As CIP reflux valve in the the manifold
● Especially for liquids and no suspension / gas medium particles.
Double seat butterfly valves can be used in food-processing, pharmacy and chemical industries. The Butterfly Valve offers an easy and safe separatation of products and prevents accidental mixing in case of gasket damage. It is often used to isolate materials that require safe separation and CIP Liquid in a single point (not in manifolds), or at the end of a manifold (e.g. CIP return) or entry of a CIP solution into a tank (through a cleaning ball).
Size: DN25-DN100, 1″- 4″
Material: 1.4404 / 1.4301,304 / 316L
Maximum Temperature: -10 ℃ – 130 ℃
Maximum Pressure: 10bar
Operation: Pneumatic/ Manual interchangeable
Control Box: C-TOP Basic type, C-TOP + AS-I communication
Seal: EPDM (standard) FPM / SILICON / NBR, FDA177.2600
Both sides of the valve body are interchangeable (no matter what connection)
Contact With Material: AISI 316L / 1.4404
Connection: SMS, RJT, DIN, 3A, ISO
INOXPA butterfly valve
INOXPA pneumatic butterfly valve
We cooperate with INOXPA for Single Seat Valve ,butterfly valve, Pressure Vacuum Valve .
Manufacture of INOXPA butterfly valve , Manufacture of INOXPA valve , Manufacture of INOXPA pressure vacuum valve.
Factory of INOXPA butterfly valve , factory of INOXPA valve , factory of INOXPA pressure vacuum valve
Produce INOXPA butterfly valve , produce INOXPA valve , produce INOXPA pressure vacuum valve
Sanitary stainless steel Union type check valve
Hygienic Sanitary Stainless Steel Union Type Check Valve
Sanitary Union Type Non Return Valve
Please find more information in our website :
Mixproof double seat butterfly valve
The mix proof butterfly valve as a process element for the
separation of media is suitable for a variety of applications：
◆In CIP systems， for separating CIP media
◆In flush-out processes
◆In water management
◆As pipe section shut-off valve for separat ig media
In CIP/gas management(breweries)
◆At storage tanks for separating product/CIP
◆As CIP return valve in a valve matrix
◆Preferably suitable for liquid and gaseous media without